H2D → H2C Vortek Calibration Guide
Comprehensive calibration guide for the Bambu Lab Vortek (H2D to H2C upgrade). Covers hotend break-in, flow calibration at high speeds, pressure advance tuning, and engineering material profiles.
$24.99
Coming Soon
The Vortek (H2C) hotend is Bambu Lab’s highest-flow system to date. This guide covers everything you need to know to dial it in for production use.
What Will Be Covered
- Hotend Break-In Procedure — Proper initial heat cycling and flow testing to avoid early clogs
- High-Speed Flow Calibration — Push the Vortek to its rated flow rates without sacrificing print quality
- Pressure Advance at Speed — PA tuning specific to the Vortek’s melt zone characteristics
- Engineering Material Profiles — PA6-CF, PA6-GF, PC, ABS, ASA — profiles tested in production
- Comparison vs Stock H2D — Actual benchmark data showing where the Vortek upgrade matters
Notify Me
This guide is in active development. Join the email list or follow @adp.industries on TikTok to get notified when it drops.